KindPack ReGrip Loop Pouch
Stand-up pouch with a wide fold-and-press closure that is easy to see, easy to grip and impossible to misalign. Blank front panel, no brand on the pack.
Quality managementBRC
Packaging auditFDA
Food contactSEDEX
Ethical auditBSCI
Social compliance
Audited and compliant — see Quality Control for reports.
- Article No.
- KP-PF-026
- Category
- Stand-Up Pouch with Reusable Hook-and-Loop Closure
- Material
- Mono-material PE, single-stream film direction
- Capacity
- 2 lb / 4 lb / 8 lb (907 g / 1.8 kg / 3.6 kg)
Specifications
Structure & Closure
- Structure
- Stand-Up Pouch with Reusable Hook-and-Loop Closure
- Closure
- Wide hook-and-loop closure strip that folds over and presses shut, plus a tear notch
- Window
- None in the default single-material build. A PE window is technically possible but must be re-verified as part of the same material stream before it is offered
- Handle
- None in the default build. A die-cut top handle is available as an option on the 6 lb and 12 lb sizes and would add a reinforced patch - to be confirmed for material-stream compatibility
- Valve or spout
- None by default; no degassing valve in the standard kibble build. A mono-material degassing valve option for high-fat formulas (to be confirmed)
Material & Build
- Material direction
- Mono-material PE, single-stream film direction
- Thickness
- 115-145 micron total at the body; doubled flange zone approx. 230-290 micron
- Standard sizes
- 2 lb / 4 lb / 8 lb (907 g / 1.8 kg / 3.6 kg)
Decoration
- Flexographic surface print, up to 8 stations, water-based inks with a solvent-free lamination direction
- Finish
- Matte body with a low-gloss sealant band on the back panel; no foil, no metallic ink and no film lamination that would break the single-material direction
Commercial
- MOQ
- 5,000 pcs / SKU (first run)
- Lead time
- Sample: 15-20 business days; mass production: 32-48 business days
- Commercial terms
- Ex-works unit price and shipping terms to be confirmed on quotation
Additional
- Product Type
- Stand-Up Pouch with Reusable Hook-and-Loop Closure
- Finished dimensions
- 2 lb / 4 lb / 8 lb (907 g / 1.8 kg / 3.6 kg). Finished size W x H + bottom gusset (mm): 2 lb approx. 210 x 320 + 70; 4 lb approx. 250 x 380 + 85; 8 lb approx. 290 x 440 + 95, all with a doubled top flange.
- Environmental status
- Claim pending - not verified
About this product
ReGrip replaces the zipper track with a wide fold-and-press closure strip. There is nothing to align, so it closes correctly every time, and it stays visibly open or closed at a glance, which solves two chronic complaints about conventional resealable pouches. The doubled top flange is engineered so the strip is welded rather than glued, and the fabric-textured band makes the closure easy to find by touch. Origami-fold graphics echo the folding gesture in the design itself. Nothing here is a verified environmental statement: CLAIM PENDING - NOT VERIFIED. No recyclability, recycled-content, mono-material or compostability claim is validated for this SKU today. Before any on-pack, listing or sales wording, the following must be documented and approved: (1) the film resin family declaration and the supplier recyclability statement; (2) a store drop-off eligibility assessment in the US and a provincial programme check in Canada; (3) evidence for any post-consumer recycled content figure (physical content or mass balance); (4) evidence for any material-reduction figure. Until then use only 'recyclable-direction material - verification pending'. Duties & taxes are not included in quoted prices.
For US and Canadian buyers who find zipper tracks frustrating; a wide fold-and-press closure is easier to use, easier to see open or closed, and reads as a deliberate design choice rather than a cost reduction. Re-homed into the KP-ECO-001 family, the North America positioning holds: Built for US and Canadian pet specialty, grocery and farm-store aisles where packaging EPR and recycled-content rules are tightening. Sized for a 4 in shelf facing and for parcel shipping, with the back panel reserved for bilingual EN / FR ingredients, feeding guidance and disposal wording that can be updated as soon as a claim is verified.
Key Features
Wide fold-and-press closure with nothing to align
Visibly open or closed at a glance
Fabric-textured band locates the closure by touch
Reinforced top flange engineered for the closure strip
Single-material PE construction direction so the body and closure stay in one film stream - claim pending verification
Decoration & Finishing
FAQ
Is your company a manufacturer or a trading company?
We are a direct manufacturer with our own factory in Dongguan, Guangdong, China, founded in 2014. You are welcome to arrange a virtual or on-site factory tour.
Can your packaging be customized?
Yes. We provide full OEM/ODM services including custom printing, size, material structure, pouch type, zipper / spout / handle options, and artwork support.
What types of packaging bags can you produce?
We produce stand-up pouches, flat bottom bags, spout pouches, retort pouches, side gusset bags, quad seal bags, kraft paper bags, mono-material recyclable bags, window bags, and bulk bags.
How do I request a quotation?
Please share your bag type, target size, estimated order quantity, material preference, and design artwork (AI or PDF). Our sales team will reply with a detailed quotation and sampling plan.
How can I contact you?
Use the inquiry form on this page, email us, or reach us via WhatsApp / WeChat. A dedicated project manager will follow up within one business day.
Request a Quote
Tell us quantity, size and target market — our team replies within one business day.
Send Inquiry