Home
About UsFactory Tour Quality Control News Contact Us

KindPack FlowWrap Treat Film

Flow-wrap film for individually wrapped treats and single-serve pieces, with eye-mark registration for accurate crimping. Blank front panel, no brand on the pack.

treatseco
USD 1.43/pc @500 → 0.53/pc @20,000
MOQ: 500 pcs (digital print) / 20,000 pcs (gravure)
ISO 9001
Quality management
BRC
Packaging audit
FDA
Food contact
SEDEX
Ethical audit
BSCI
Social compliance

Audited and compliant — see Quality Control for reports.

Article No.
KP-PF-024
Category
Flow-Wrap Film for Horizontal Wrapping
Material
Thin-gauge mono-PE portion and roll-stock direction
Capacity
Custom to the wrapped piece; typical single-piece packs 0.3 oz - 2 oz (8 g - 57 g)
Request a Quote

Specifications

Structure & Closure

Structure
Flow-Wrap Film for Horizontal Wrapping
Closure
Closure is formed by the customer's horizontal flow-wrapper end crimp; film is supplied with an eye-mark for accurate registration
Window
None. The pack is fully printed or left as a solid unprinted area; a clear window on a portion pack adds a material and is not offered
Handle
None. Not applicable to this format
Valve or spout
None. No valve and no spout; this is a tear-open portion pack

Material & Build

Material direction
Thin-gauge mono-PE portion and roll-stock direction
Thickness
40-65 micron total
Standard sizes
Custom to the wrapped piece; typical single-piece packs 0.3 oz - 2 oz (8 g - 57 g)

Decoration

Print
Flexographic surface print, up to 8 stations, water-based inks at high line speed; register to be set for the narrow web width
Finish
Gloss or matte finish depending on the print line; no foil, no metallic ink and no cold-seal coating that would add a second material

Commercial

MOQ
300 pcs / SKU (first run)
Lead time
Sample: 7-12 business days; mass production: 20-30 business days
Commercial terms
Ex-works unit price and shipping terms to be confirmed on quotation

Additional

Product Type
Flow-Wrap Film for Horizontal Wrapping
Finished dimensions
Custom to the wrapped piece; typical single-piece packs 0.3 oz - 2 oz (8 g - 57 g).
Environmental status
Claim pending - not verified

About this product

Food-Safe MaterialsThin-gauge mono-PE portion and roll-stock direction
Barrier & Seal IntegrityFlow-Wrap Film for Horizontal Wrapping
Custom SizesCustom to the wrapped piece; typical single-piece packs 0.3 oz - 2 oz (8 g - 57 g)

FlowWrap is the film behind individually wrapped treats. Registration eye-marks keep artwork centered on every piece at line speed, and the sealant layer is chosen for a clean fin seal without tunneling on greasy pieces. Individually wrapped treats let a brand sell single-serve price points, build sampler multipacks and improve freshness perception between uses. Reef-bright colorways give multipack bags a lively look that suits training and reward-positioned product lines. Nothing here is a verified environmental statement: CLAIM PENDING - NOT VERIFIED. No recyclability, recycled-content or mono-material claim is validated for this SKU. Small-format films are frequently below the size threshold used by recovery programmes, and this must be checked rather than assumed. Any PCR figure, any store drop-off wording and any material-reduction claim require supplier declarations and a programme eligibility check first. Permitted wording today: 'mono-material PE direction, small-format recovery eligibility under verification'. Duties & taxes are not included in quoted prices.

For US and Canadian multipack and variety-bag programs, where individual treat wrapping improves freshness perception, supports single-serve price points and enables sampler multipacks. Re-homed into the KP-ECO-007 family, the North America positioning holds: Aimed at the US and Canadian training-treat, sample and topper segment, where portion packs move through subscription boxes, vet clinics and retail clip strips. Roll-stock feeding gives high output per shift, the flat profile keeps postage and parcel weight low, and the blank front area suits a buyer's brand plus a legibility zone.

Key Features

Eye-mark registration keeps artwork centered at line speed

Fin-seal-capable sealant for individual treat wrapping

Grease-resistant sealant options for oily pieces

Enables single-serve price points and sampler multipacks

Thin-gauge mono-PE portion and roll-stock direction for source reduction - claim pending verification

Decoration & Finishing

PrintFlexographic surface print, up to 8 stations, water-based inks at high line speed; register to be set for the narrow web width
FinishGloss or matte finish depending on the print line; no foil, no metallic ink and no cold-seal coating that would add a second material

FAQ

Is your company a manufacturer or a trading company?

We are a direct manufacturer with our own factory in Dongguan, Guangdong, China, founded in 2014. You are welcome to arrange a virtual or on-site factory tour.

Can your packaging be customized?

Yes. We provide full OEM/ODM services including custom printing, size, material structure, pouch type, zipper / spout / handle options, and artwork support.

What types of packaging bags can you produce?

We produce stand-up pouches, flat bottom bags, spout pouches, retort pouches, side gusset bags, quad seal bags, kraft paper bags, mono-material recyclable bags, window bags, and bulk bags.

How do I request a quotation?

Please share your bag type, target size, estimated order quantity, material preference, and design artwork (AI or PDF). Our sales team will reply with a detailed quotation and sampling plan.

How can I contact you?

Use the inquiry form on this page, email us, or reach us via WhatsApp / WeChat. A dedicated project manager will follow up within one business day.

Request a Quote

Tell us quantity, size and target market — our team replies within one business day.

Send Inquiry
Product Finder